Laurence is a copywriter and trained journalist. His passion is creating insightful and educational content for dental professionals of every level. Outside of work, he enjoys watching sport, quizzing and spending time with his family.
What Is A Dental Curing Light?
A dental curing light is a small piece of equipment used by dental care professionals for the polymerisation of light-cured resin composites.
Once a restorative material has been placed within the mouth of the patient, a hand-held curing light is hovered directly over the tooth and triggered to emit light over the material until it is fully hardened or “cured”.
There have been significant improvements in curing lights in recent years. The earliest lights - first used in the 1960s and 1970s - projected light in the ultra-violet range. Halogen lights replaced these in the 1980s, before light emitting diode (LED) curing lights arrived in the 1990s and went on to become the top choice among dentists.
LED curing lights produce a blue light in a specific wavelength that can be easily controlled. They are lightweight and portable with short curing times, reduced heat generation and longer service life compared to halogen lights.
Curing Light Output Power
A key feature of a curing light is the output power, often referred to as irradiance or brightness. Measured in milliwatts per square centimetre (mW/cm2), output power is the amount of light that the curing light is able to produce. LED curing lights are known for generating output powers of greater than 1,000 mW/cm2 and can cure most materials. Some LED curing lights can reach a light intensity of 2,000mW/cm2 which enables the curing of thicker materials and a wider range of shades and opacities.
According to Ivoclar Vivadent, at least 1,000 mW/cm2 is needed to polymerise composite materials in 10 seconds through a dental structure in indirect restoration. However, for direct restorations, only 400 mW/cm2 of output power is required for proper light-curing. Higher brightness means a higher generation of heat. The best dental curing lights have a low wattage requirement and offer a long lifespan without deterioration of output power. Light intensity can be measured and monitored using a radiometer to ensure consistency.
